Bogen's Power Vector modular amplifiers offer a wide range of power levels from which to choose, with five models from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting plug-in signal-processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED?output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately). 5 models ranging from 35W to 250W each; a mixer-only version (VMIX) is also available Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads 8 module bays Wide selection of advanced plug-in modules (modules sold separately) 4 levels of priority between modules 2 module bays capable of handling plug-in signalprocessing output modules 11-segment LED?output level meter monitors the output level of the power amplifier with Avg./Peak meter switch Motorized master volume control can be remotely operated Lockable switch permits user to select either transformer-coupled outputs or a direct lowimpedance output 5-position barrier strip, with clamping washers, provides connections for speaker loads Bridging In/Out connector External access to priority mute buses Bridging jack and Mute terminals join multiple Power Vector amps and mixers together Independent volume control for each of the eight module bays Two-color LED for each channel indicates input signal or clipping Bass and treble control with bypass switch (located in module bay 6) 125 Hz Low Cut switch (located in module bay 6) Signal-processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input Pre-EQ, unbalanced, buffered output signal ( post all unit controls, but pre any external Insert equipment connected) Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment 8 module security cover/filler plates included with amplifier (PVMC) Push-button remote volume control panel (Model RVCP, sold separately) Security cover to selectively protect volume, bass, and treble controls (Model PVSC, sold separately) Rack mountable (with rack mounting kit RPK87, sold separately) 2 rack spaces high (3-1/2") Listed to UL Standard 60065 for U.S. and Canada