Filtered by Brand

Bogen 

Categories New

Brands

  •
    Product Code:
    TB8
    Brand:
    Bogen

    Tile Bridge For Speaker Mount
    The TB8 Tile Bridge is a load-bearing T-bar support designed to sustain the weight of an 8" speaker, grille and protective enclosure in suspended ceiling construction. Use of the TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 2'-by-4' acoustic ceiling tiles.
  • Product Code:
    RE84
    Brand:
    Bogen

    Round Recessed Steel Spkr Encl
    The RE84 Ceiling Speaker Enclosure is a protective enclosure for an 8" speaker, designed for recessed installations, and for use with any of the Bogen ceiling grilles. One-piece steel construction includes a mounting ring and a foam insert to reduce metallic resonance. The RE84 is finished in rust-resistant primer and ...
  • Product Code:
    MB8TSL
    Brand:
    Bogen

    Slant Mtl Encl, 8In. 4W Trans
    Bogen's MB8TSQ and MB8TSL speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The MB8TSQ speakers are suitable for ceiling or wall mounting. The MB8TSL speakers are designed primarily for wall mounting, with front face angled downward by 12.5 degrees ...
  • Product Code:
    SM4T
    Brand:
    Bogen

    Easy Mount Speaker 4 Taps
    The Bogen SM1EZ and SM4T Easy Install Speakers are surface-mount speakers, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools. First, two specially-designed studs pierce the ceiling tile. Second, two custom-designed wing nuts secure the speaker to the ceiling ...
  • Product Code:
    CSD2X2
    Brand:
    Bogen

    Speaker, Ceiling 2 X 2 Panel
    The CSD2X2 is a 2' x 2' speaker that fits perfectly into place in 2' x 2' ceiling grids without needing to cut ceiling tiles or requiring the use of tile support rails. The CSD2X2 can also be easily installed in 2' x 4' ceiling grids just make one cut ...
  • Product Code:
    TBCR
    Brand:
    Bogen

    Tile Bridge/C Ring/Ocs1, Hfcs1
    Tile Bridge Support Ring (TBCR) supports weight of speakers installed in suspended ceilings. Use with clamping type ceiling speakers.
  • Product Code:
    SAH5
    Brand:
    Bogen

    5 Watt Switching Amp Horn
    The SAH5, SAH15, and SAH30 powered horn loudspeakers employ digital switching amplifier technology resulting in low DC current draw and low heat dissipation.This means fewer power supplies, longer cable runs, and the capacity to work at higher ambient temperatures when compared to conventional analog selfamplified horn speakers. The horn ...
  • Product Code:
    AT10A
    Brand:
    Bogen

    Auto Xfmr Attenuator
    10W Attenuator. Control of up to 10W of speakers. 10-position settings plus Off. Allows local control of a group of speakers, without altering amplifier volume setiing. For 25V and 70V systems. Mounts in standard electrical box. Simple connections.
  • Product Code:
    SPT30A
    Brand:
    Bogen

    Paging Horn W/Xfmr 30 Watt
    The Bogen SPT30A and SP308A are compact, high intelligibility, reentrant type loudspeakers, designed for one-way or two-way sound and communication systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. The Model SPT30A has a ...
  • Product Code:
    UTI1
    Brand:
    Bogen

    Single-Zone Universal Telephone Interface

    The UTI1 Universal Telephone Interface provides single-zone paging for one-way applications such as self-amplified speaker systems. It is compatible with all standard analog port types and includes two audio outputs with level controls, each of which can provide audio for 150 Bogen self-amplified speakers. A 24V DC @ 1A internal power ...

  •
    Product Code:
    MB8TSQ
    Brand:
    Bogen

    Sq Mtl Encl, 8In. 4W Trans
    Bogen's MB8TSQ and MB8TSL speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The MB8TSQ speakers are suitable for ceiling or wall mounting. The MB8TSL speakers are designed primarily for wall mounting, with front face angled downward by 12.5 degrees ...
  • Product Code:
    KFLDS30T
    Brand:
    Bogen

    30W Wide Dispersional Horn
    The Bogen KFLDS30T is a wide dispersion, high-intelligibility, reentrant-type horn loudspeaker designed for applications where wide angle projection and directivity is a necessity. The flare-shaped horn can be rotated to project wider dispersion in either the horizontal or vertical plane. The speaker s all-purpose tilt-and-swivel base simplifies installation and positioning ...
  • Product Code:
    HFCS1
    Brand:
    Bogen

    High Fidelity Ceiling Speaker
    The Bogen HFCS1 and HFCS1LP ceiling loudspeakers deliver superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under ...
  • Product Code:
    BDT30A
    Brand:
    Bogen

    Bidirect Horn W/Xfrm 30 Watt
    Bi-Directional Reentrant Horn Loudspeaker. Twin reentrant horns for bi-directional projection. High intelligibility and efficiency. Ideal for both one-way and talkback paging applications. Weatherproof. Sturdy, all-metal construction. 30 watts max. at 70V operation or 15 watts max at 25V operation. Tap settings for 70V: 30, 15, 7.5, 3.7, 1 ...
  • Product Code:
    HFCS1LP
    Brand:
    Bogen

    H/F Low Profile Ceiling Spkr
    The Bogen HFCS1 and HFCS1LP ceiling loudspeakers deliver superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under ...
  • Product Code:
    ASWG1
    Brand:
    Bogen

    Speaker 8In 1 Watt White Ceiling Grill

    8" Cone speaker. Self-contained 1-watt amplifier. Interfaces with standard 600-ohm telephone line. Available on an off-white semi-gloss enameled ceiling grille (ASWG1, ASWG1DK), or bright white finish ( ASUG1, ASUG1DK). Ceiling assembly with fixed front-mounted volume control knob (ASUG1, ASWG1).

  •
    Product Code:
    TPU250
    Brand:
    Bogen

    Amplifier 250 Watt
    Bogen models TPU35B, TPU60B, TPU100B, and TPU250 are wall-mounted telephone paging amplifiers rated at 35, 60, 100, and 250 watts, respectively. All models can also be rack-mounted*. These TPU amplifiers permit paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level ...
  • Product Code:
    C100
    Brand:
    Bogen

    100 Watt Amplifier
    Classis Series Public Address Amplifiers. 3 models: 35, 60, and 100 watts. 4 inputs: 1 MIC (Lo-Z), 1 AUX (Hi-Z), 1 TEL, plus 1 selectable MIC or AUX. Each input controlled by an independent volume control. Treble and bass controls. AUX muting by external contact closure for push-to-talk microphones. TEL ...
  • Product Code:
    PRS2403
    Brand:
    Bogen

    Power Supply 24V@300Ma
    Bogen’s DC Power Supplies are designed to supply power to battery-operated, other low voltage DC equipment, or 24V DC equipment from a 120V AC source. They are rugged, versatile, and dependable, making them suitable for many types of telephone paging equipment, amplified speakers and horns, tone generators, and intercom ...
  • Product Code:
    CSD1X2
    Brand:
    Bogen

    Speaker, Ceiling 1 Ft X 2 Ft
    Drop-In Ceiling Speaker. Bogen s CSD1X2 Drop-In Ceiling Speakers are 1ft. X 2ft. speakers that allow for fast and easy installation. Just make one simple cut to the ceiling tile, lay the support rail crossbar (included) across the ceiling grid, and drop the speaker into place. Finely perforated grille over ...
  • Product Code:
    HFSF1
    Brand:
    Bogen

    Ceiling Spk, Small Footprint
    The Bogen HFSF1 High-Fidelity, Small-Footprint Ceiling Loudspeaker delivers superior sound in a very compact enclosure. The speaker measures 7-1/4" diameter and mounts easily in all types of ceilings including existing hard-surfaced types and suspended type. Several levels of power output can be controlled directly from the front baffle via ...
  • Product Code:
    PCMSYS3
    Brand:
    Bogen

    3-Zone PCM Prebuilt W/PCMPS2
    The PCMSYS3 is a pre-assembled and tested 3-zone PCM system with a PCMPS2 power supply. Use it right out of the box for 1 to 3 zone applications or expand it with other PCM modules. Provides all the same great features found in the PCM2000 zone paging system. Paging Features ...
  • Product Code:
    PCMZPM
    Brand:
    Bogen

    Zone Paging Module/3 Zones Per
    The PCMZPM zone paging module can operate high-power or low-power paging to self-amplified paging systems (only one type per PCMZPM module). For high-power paging, a single amplifier can be used for paging and supplying background music (when not paging). Background music can also be continuously supplied to all zones not ...
  • Product Code:
    TBL1S
    Brand:
    Bogen

    Transformer Balanced Line
    TRANSFORMER-BALANCED (TBL1S). Transformer-balanced AUX input module. Transformer-isolated line-level input. Gain/Trim control. Bass & Treble controls. Gating w/Threshold & Duration. Mute send & receive. Variable ducking level when muted/gated. Fade back from mute/gate. 4 Priority levels. Bus assignable. Pluggable screw terminal connections.
  • Product Code:
    TAMB2
    Brand:
    Bogen

    Telephone Access Module Ver 2
    The Bogen TAMB2 Telephone Access Module is a unique, dual-purpose voice paging adapter designed as an interface from a telephone system to a paging system. This versatile unit offers the capability of station port or trunk port operation, and is compatible with the full range of analog telephone port types ...