• Product Code:
    TB8
    Brand:
    Bogen

    Tile Bridge For Speaker Mount

    The TB8 Tile Bridge is a load-bearing T-bar support designed to sustain the weight of an 8" speaker, grille and protective enclosure in suspended ceiling construction. Use of the TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 2'-by-4' acoustic ceiling tiles.
  • Product Code:
    RE84
    Brand:
    Bogen

    Round Recessed Steel Spkr Encl

    The RE84 Ceiling Speaker Enclosure is a protective enclosure for an 8" speaker, designed for recessed installations, and for use with any of the Bogen ceiling grilles. One-piece steel construction includes a mounting ring and a foam insert to reduce metallic resonance. The RE84 is finished in rust-resistant primer and ...
  • Product Code:
    900LCC-50
    Brand:
    Suttle

    1-Line Inline DSL Filter

    1-line inline DSL filter, ADSL and VDSL2 up to 30 MHz compatible. The In-line Filter connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing a filtered jack for single phone line. Suttle In-line DSL filters eliminate all erratic impedance from telephone equipment ...
  • Product Code:
    630LCCU-52
    Brand:
    Suttle

    1-Line Wall Mount Adapter DSL Filter-Electrical Ivory

    1-line wall mount adapter DSL filter with both an auxiliary filtered and unfiltered jack, textured finish, single gang, snap-on, ADSL compatable. Standard Plate Size. Single Gang Box Width. Electrical Ivory. The Wall Mount DSL Adapter mounts to an existing wall mount phone jack providing an unfiltered jack for your DSL ...
  • Product Code:
    900LCC-2F-50
    Brand:
    Suttle

    2-Line Inline DSL Filter

    2-line inline DSL filter, ADSL and VDSL2 up to 30 MHz compatible. The In-line Filter connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing a single filtered jack for one or two lines of voice device communications. Suttle In-line DSL filters eliminate ...
  • Product Code:
    267B
    Brand:
    Suttle

    2-Line Split Inline Adapter with 1 and 6 Parallel

    Used for connecting two telephones and/or ancillary devices to separate outside lines through a single 4 contact jack wired for termination of two lines. 4 conductor modular T adapter which is used for connecting two telephones and-or ancillary devices to separate outside lines through a single 4 contact jack ...
  • Product Code:
    900LCCS-50
    Brand:
    Suttle

    1-Line Inline Adapter DSL Filter

    1-line inline adapter DSL filter w/ auxiliary unfiltered jack, ADSL compatible. The In-line Adapter connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing both an unfiltered DSL jack for DSL connection and a filtered jack for one or two lines of voice ...
  • Product Code:
    3B1E
    Brand:
    Circa

    5 PIN GAS TUBE 350V MODULE

    The 3B1E is a premium 5 pin, 3-element gas tube protector module that is designed to provide excellent transient and power fault protection for most standard telephone line applications. Circa's gas tube modules are perfectly suited to remote location and low pair count applications that require heavyduty current handling ...
  • Product Code:
    900LCCS-2F-50
    Brand:
    Suttle

    2-Line Inline Adapter DSL Filter

    2-line inline adapter DSL filter w/ auxiliary unfiltered jack, ADSL compatible. The In-line DSL Adapter connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing both an unfiltered DSL jack for DSL connection and a filtered jack for one or two lines of ...
  • Product Code:
    464
    Brand:
    Suttle

    2 for 1-4 Conductor Inline Adapter with Pig Tail

    2 for 1 inline modular adapter with pig tail, 4-conductor to 4-4-conductor, designed for connecting two headsets to a standard console headset jack. 1xRJ22 Plug Input. 2xRJ22 Jacks Output. Flexible Handset Jack Splitter is used for operator training purposes where two headsets can be plugged into the 464 for student ...
  • Product Code:
    SM4T
    Brand:
    Bogen

    Easy Mount Speaker 4 Taps

    The Bogen SM1EZ and SM4T Easy Install Speakers are surface-mount speakers, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools. First, two specially-designed studs pierce the ceiling tile. Second, two custom-designed wing nuts secure the speaker to the ceiling ...
  • Product Code:
    TBCR
    Brand:
    Bogen

    Tile Bridge/C Ring/Ocs1, Hfcs1

    Tile Bridge Support Ring (TBCR) supports weight of speakers installed in suspended ceilings. Use with clamping type ceiling speakers.
  • Product Code:
    CSD2X2
    Brand:
    Bogen

    Speaker, Ceiling 2 X 2 Panel

    The CSD2X2 is a 2' x 2' speaker that fits perfectly into place in 2' x 2' ceiling grids without needing to cut ceiling tiles or requiring the use of tile support rails. The CSD2X2 can also be easily installed in 2' x 4' ceiling grids just make one cut ...
  • Product Code:
    SSB-2
    Brand:
    Aiphone

    Ceiling Support Bridge For Sp-20N & SP-2570N

    Ceiling support bridge for the SP-20N & SP-2570N speakers.
  • Product Code:
    305A
    Brand:
    Suttle

    2-line 305 Terminal Block

    2-line, 305 terminal block, screw-on cover, screw terminals. Ivory. 2 Line Terminal Box without Modular Jack provides modular access to a wire entry point, or as an unprotected premise network interface. Allows multiple station runs from a service entry point Flame-retardant thermoplastic Captive retaining screw keeps the cover securely fastened ...
  • Product Code:
    4B1FS-240
    Brand:
    Circa

    5 PIN SOLID STATE 240V MODULE WITH PTC

    The 3B1S-300 & 3B1FS-240 premium series 5-pin solid-state protector modules are designed to provide superior transient and power fault protection for most standard telephone line applications. These solidstate modules are particularly suited to applications that require the protection of very sensitive digital equipment due to their nano-second reaction time. The balanced ...
  • Product Code:
    SAH5
    Brand:
    Bogen

    5 Watt Switching Amp Horn

    The SAH5, SAH15, and SAH30 powered horn loudspeakers employ digital switching amplifier technology resulting in low DC current draw and low heat dissipation.This means fewer power supplies, longer cable runs, and the capacity to work at higher ambient temperatures when compared to conventional analog selfamplified horn speakers. The horn ...
  • Product Code:
    UTI1
    Brand:
    Bogen

    Single-Zone Universal Telephone Interface

    The UTI1 Universal Telephone Interface provides single-zone paging for one-way applications such as self-amplified speaker systems. It is compatible with all standard analog port types and includes two audio outputs with level controls, each of which can provide audio for 150 Bogen self-amplified speakers. A 24V DC @ 1A internal power ...

  • Product Code:
    MB8TSQ
    Brand:
    Bogen

    Sq Mtl Encl, 8In. 4W Trans

    Bogen's MB8TSQ and MB8TSL speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The MB8TSQ speakers are suitable for ceiling or wall mounting. The MB8TSL speakers are designed primarily for wall mounting, with front face angled downward by 12.5 degrees ...
  • Product Code:
    AT10A
    Brand:
    Bogen

    Auto Xfmr Attenuator

    10W Attenuator. Control of up to 10W of speakers. 10-position settings plus Off. Allows local control of a group of speakers, without altering amplifier volume setiing. For 25V and 70V systems. Mounts in standard electrical box. Simple connections.
  • Product Code:
    HFCS1
    Brand:
    Bogen

    High Fidelity Ceiling Speaker

    The Bogen HFCS1 and HFCS1LP ceiling loudspeakers deliver superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under ...
  • Product Code:
    HFCS1LP
    Brand:
    Bogen

    H/F Low Profile Ceiling Spkr

    The Bogen HFCS1 and HFCS1LP ceiling loudspeakers deliver superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under ...
  • Product Code:
    3B1S-300
    Brand:
    Circa

    5 PIN SOLID STATE 300V BLACK MODULE

    The 3B1S-300 & 3B1FS-240 premium series 5-pin solid-state protector modules are designed to provide superior transient and power fault protection for most standard telephone line applications. These solidstate modules are particularly suited to applications that require the protection of very sensitive digital equipment due to their nano-second reaction time. The balanced ...
  • Product Code:
    3B1FS-240
    Brand:
    Circa

    5 PIN SOLID STATE 240V MODULE

    The 3B1S-300 & 3B1FS-240 premium series 5-pin solid-state protector modules are designed to provide superior transient and power fault protection for most standard telephone line applications. These solidstate modules are particularly suited to applications that require the protection of very sensitive digital equipment due to their nano-second reaction time. The balanced ...
  • Product Code:
    PA-2A

    Multi-Line Loud Ringer-2 Watt Paging Amplifier

    Paging-Loud Ringing Amplifier for Multi-Lines. The PA-2A provides loud ringing and paging to electronic key systems, 1A2 Key systems, PABX s as well as No-KSU phones and multiline phones. Paging is accomplished by connecting the PA-2A to a paging port or unused telephone line input (trunk port) of nearly any ...