• Product Code:
    TB8
    Brand:
    Bogen

    Tile Bridge For Speaker Mount

    The TB8 Tile Bridge is a load-bearing T-bar support designed to sustain the weight of an 8" speaker, grille and protective enclosure in suspended ceiling construction. Use of the TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 2'-by-4' acoustic ceiling tiles.
  • Product Code:
    RE84
    Brand:
    Bogen

    Round Recessed Steel Spkr Encl

    The RE84 Ceiling Speaker Enclosure is a protective enclosure for an 8" speaker, designed for recessed installations, and for use with any of the Bogen ceiling grilles. One-piece steel construction includes a mounting ring and a foam insert to reduce metallic resonance. The RE84 is finished in rust-resistant primer and ...
  • Product Code:
    BB2
    Brand:
    Quam

    BB2

    The BB2 is a complete, beam mount loudspeaker system consisting of an 8C10PAX - 8" O.D. dual cone loudspeaker with a 10 oz. magnet, TBLU - 5W-25/70V transformer, BR8WS - round, studded baffle and two (2) beam clamps attached to a round, steel backbox.
  • Product Code:
    ERD8U
    Brand:
    Quam

    ERD8U

    The ERD8U is a UL Listed, 275 CID, round, steel loudspeaker back box with a circular, molded polystyrene damping pad fitted to the inside top of the enclosure, with four (4) welded tie-off straps.
  • Product Code:
    MB8TSL
    Brand:
    Bogen

    Slant Mtl Encl, 8In. 4W Trans

    Bogen's MB8TSQ and MB8TSL speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The MB8TSQ speakers are suitable for ceiling or wall mounting. The MB8TSL speakers are designed primarily for wall mounting, with front face angled downward by 12.5 degrees ...
  • Product Code:
    SM4T
    Brand:
    Bogen

    Easy Mount Speaker 4 Taps

    The Bogen SM1EZ and SM4T Easy Install Speakers are surface-mount speakers, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools. First, two specially-designed studs pierce the ceiling tile. Second, two custom-designed wing nuts secure the speaker to the ceiling ...
  • Product Code:
    CSD2X2
    Brand:
    Bogen

    Speaker, Ceiling 2 X 2 Panel

    The CSD2X2 is a 2' x 2' speaker that fits perfectly into place in 2' x 2' ceiling grids without needing to cut ceiling tiles or requiring the use of tile support rails. The CSD2X2 can also be easily installed in 2' x 4' ceiling grids just make one cut ...
  • Product Code:
    TBCR
    Brand:
    Bogen

    Tile Bridge/C Ring/Ocs1, Hfcs1

    Tile Bridge Support Ring (TBCR) supports weight of speakers installed in suspended ceilings. Use with clamping type ceiling speakers.
  • Product Code:
    SSB-2
    Brand:
    Aiphone

    Ceiling Support Bridge For Sp-20N & SP-2570N

    Ceiling support bridge for the SP-20N & SP-2570N speakers.
  • Product Code:
    SAH5
    Brand:
    Bogen

    5 Watt Switching Amp Horn

    The SAH5, SAH15, and SAH30 powered horn loudspeakers employ digital switching amplifier technology resulting in low DC current draw and low heat dissipation.This means fewer power supplies, longer cable runs, and the capacity to work at higher ambient temperatures when compared to conventional analog selfamplified horn speakers. The horn ...
  • Product Code:
    AT10A
    Brand:
    Bogen

    Auto Xfmr Attenuator

    10W Attenuator. Control of up to 10W of speakers. 10-position settings plus Off. Allows local control of a group of speakers, without altering amplifier volume setiing. For 25V and 70V systems. Mounts in standard electrical box. Simple connections.
  • Product Code:
    SPT30A
    Brand:
    Bogen

    Paging Horn W/Xfmr 30 Watt

    The Bogen SPT30A and SP308A are compact, high intelligibility, reentrant type loudspeakers, designed for one-way or two-way sound and communication systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. The Model SPT30A has a ...
  • Product Code:
    MB8TSQ
    Brand:
    Bogen

    Sq Mtl Encl, 8In. 4W Trans

    Bogen's MB8TSQ and MB8TSL speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The MB8TSQ speakers are suitable for ceiling or wall mounting. The MB8TSL speakers are designed primarily for wall mounting, with front face angled downward by 12.5 degrees ...
  • Product Code:
    KFLDS30T
    Brand:
    Bogen

    30W Wide Dispersional Horn

    The Bogen KFLDS30T is a wide dispersion, high-intelligibility, reentrant-type horn loudspeaker designed for applications where wide angle projection and directivity is a necessity. The flare-shaped horn can be rotated to project wider dispersion in either the horizontal or vertical plane. The speaker s all-purpose tilt-and-swivel base simplifies installation and positioning ...
  • Product Code:
    HFCS1
    Brand:
    Bogen

    High Fidelity Ceiling Speaker

    The Bogen HFCS1 and HFCS1LP ceiling loudspeakers deliver superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under ...
  • Product Code:
    BDT30A
    Brand:
    Bogen

    Bidirect Horn W/Xfrm 30 Watt

    Bi-Directional Reentrant Horn Loudspeaker. Twin reentrant horns for bi-directional projection. High intelligibility and efficiency. Ideal for both one-way and talkback paging applications. Weatherproof. Sturdy, all-metal construction. 30 watts max. at 70V operation or 15 watts max at 25V operation. Tap settings for 70V: 30, 15, 7.5, 3.7, 1 ...
  • Product Code:
    HFCS1LP
    Brand:
    Bogen

    H/F Low Profile Ceiling Spkr

    The Bogen HFCS1 and HFCS1LP ceiling loudspeakers deliver superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under ...
  • Product Code:
    ASWG1
    Brand:
    Bogen

    Speaker 8In 1 Watt White Ceiling Grill

    8" Cone speaker. Self-contained 1-watt amplifier. Interfaces with standard 600-ohm telephone line. Available on an off-white semi-gloss enameled ceiling grille (ASWG1, ASWG1DK), or bright white finish ( ASUG1, ASUG1DK). Ceiling assembly with fixed front-mounted volume control knob (ASUG1, ASWG1).

  • Product Code:
    CSD1X2
    Brand:
    Bogen

    Speaker, Ceiling 1 Ft X 2 Ft

    Drop-In Ceiling Speaker. Bogen s CSD1X2 Drop-In Ceiling Speakers are 1ft. X 2ft. speakers that allow for fast and easy installation. Just make one simple cut to the ceiling tile, lay the support rail crossbar (included) across the ceiling grid, and drop the speaker into place. Finely perforated grille over ...
  • Product Code:
    HFSF1
    Brand:
    Bogen

    Ceiling Spk, Small Footprint

    The Bogen HFSF1 High-Fidelity, Small-Footprint Ceiling Loudspeaker delivers superior sound in a very compact enclosure. The speaker measures 7-1/4" diameter and mounts easily in all types of ceilings including existing hard-surfaced types and suspended type. Several levels of power output can be controlled directly from the front baffle via ...
  • Product Code:
    AT35A
    Brand:
    Bogen

    Attenuator (57-4422-01)

    35W Attenuator. Control up to 35W of speakers. 10-position settings plus OFF. Allows local control of a group of speakers, without altering amplifier volume setting. For 25V and 70V systems. Mounts in standard electrical box. Simple connections.
  • Product Code:
    MB8TSQVR
    Brand:
    Bogen

    Sq Mtl Encl,8In. 4W Trans W/Vr

    Bogen's MB8TSQ and MB8TSL speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The MB8TSQ speakers are suitable for ceiling or wall mounting. The MB8TSL speakers are designed primarily for wall mounting, with front face angled downward by 12.5 degrees ...
  • Product Code:
    S86T725PG8UVK
    Brand:
    Bogen

    Spkr W/Bright White Grille

    4-watt capacity 8" cone speaker for excellent audio quality 6 different power taps available (4, 2, 1, 1/2, 1/4, 1/8 W) T725 4-watt transformer Off-white enamel over steel grille ( W versions) Bright white enamel over steel grille ( U versions) Pre-assembled for faster installation Works with both 70V ...

  • Product Code:
    WMT1A
    Brand:
    Bogen

    Line Xfmr 500 Ohm (57-4188-01)

    Line-Matching Transformer. Hi-Z, 10k-ohm primary impedance. Lo-Z, 600-ohm secondary impedance, balanced with center tap. Matches high-to-low impedance to low-to-high impedance. Adapts line level signals to microphone inputs. RCA connector for Hi-Z side. Screw terminals for Lo-Z side.
  • Product Code:
    CK10
    Brand:
    Bogen

    Cable, 10 Foot Kit

    Cable Kit (CK10) available in silver. 10ft. long cable with fixed loop. Use as safety cable.